2020. 2. 27. 08:24ㆍ카테고리 없음
Now we start on the fabric. Lay out your fabric wrong side up. Place the bottom of the coffin on the fabric and bring the side of the fabric up, over, and into the box.
Hold the fabric in place on that side and bring the fabric over the other side. You want there to be an excess on the floor of the box to be covered by the inserts to hold the fabric in place.
When you have this measurement, cut off the excess fabric and measure the same way from top to bottom. Repeat this process with the lid of the coffin.
Before gluing the fabric in place, we want to mark the holes for the handle. In the hardware section of places like Walmart you can get really cheap door pulls. Or you can go to Home Depot and hardly spend any more for something just a little fancier. They both will look cool.
The Coffin Is Too Big For The Hole Pdf Download
Remove the handle from the package and decide which surface you will attach it to. Basically, try to imagine what it will look like when you are carrying it.
Do you want the coffin facing backwards, forwards, left, or right. When that decision is made, place the handle on the box and use a pen to mark the hole placement. With the box cutter, push through the duct tape and cardboard to create the holes. Push the screw through each hole to ensure size. Now, measure the length of the long side of the coffin, the opposite side from where the handle will be placed.
Cut a rectangle of fabric that wide, and long enough to glue under the insert of the lid to under the insert of the base. Glue the lid side first and set it aside to dry.
After a few minutes, put glue in the floor of the base and bring it up to the other piece and rest the fabric in the glue. When holding the lid, you want it just open enough that it’s natural for using the purse, but not so open that this fabric hinge won’t hold the purse together.